DTF 25 SH

Working width 250mm
With the DTF 25 SH the surface is carefully „grinded off“ instead of chipping it away. Thus the machine runs calmly and produces a smooth surface. The DTF 25 SH has a drum which is equipped with diamond blades. It removes the material very precise. For grooving or milling you can choose between two different diamond blades: one for rough and one for smooth surface preparation. For running the machine you must connect the water cooling system so the diamond blades do not overheat. The machine is available as a 11 kW electrical version with a hydraulic traction unit.

DTF-25-SH-hero

products

DTF 25 SH

with hydraulic traction, 400V

Article number708697
Power400V, 50HZ
Wattage/HP11Kw/14.8HP
Weight223.2Kg/492lbs
Working width25cm/10"
Distance to wall10cm/4.1"
Depth hard concrete10mm/.40"
Depth softer concrete12mm/.48"
Production/h45-50m2/485-540 ft2/h on maximum depth
Dimensions cm/inch115x48x115/45x19x45
Standard cutters included66pcs Diamond blades 125mm/5"

DTF 25 SH

with hydraulic traction, 480V

Article number800015
Power480V, 60HZ
Wattage/HP11Kw/14.8HP
Weight220Kg/485lbs
Working width25cm/10"
Distance to wall10cm/4.1"
Depth hard concrete10mm/.40"
Depth softer concrete12mm/.48"
Production/h45-50m2/485-540 ft2/h on maximum depth
Dimensions cm/inch115x48x115/45x19x45
Standard cutters included66pcs Diamond blades 125mm/5"

DTF 25 SH LPG

Honda, propane

Article number800076
Engine/powerHonda 22 HP, 16.5 kW, propane
Wattage/HP11Kw/14.8HP
Weight240Kg/529 lbs
Working width25cm/10"
Distance to wall6.7 cm/2.6"
Depth hard concrete10mm/.40"
Depth softer concrete12mm/.48"
Production/h540-595 f2/h, 50-55 m2/h on maximum depth
Dimensions cm/inch115x48x115/45x19x45
Standard cutters included73 pcs of 5”, 125 mm diamond blades

DTF 25 SH LPG

Vanguard, propane

Article code800076V
Engine/powerVanguard, propane
Wattage/HP23 Kw/31 HP
Weight240 Kg/529 lbs
Working width25 cm/10"
Distance to wall6.7 cm/2.6"
Depth hard concrete10 mm/.40"
Depth softer concrete12 mm/.48"
Production/hUp to 968 f2/h, 90 m2/h
Dimensions cm/inch115x48x115/45x19x45
Standard cutters included73 pcs of 5”, 125 mm diamond blades

SF DTF 25

Side cutter to DTF 25 and DTF 25 SH

Article no. 707534

 

Weight:ca. 15 kg (33 lbs)
Working width:87mm (3.5“)
Distance to wall:15mm (0.6“)
Dimensions:320 x 215 x 200mm (13 x 8.5 x 8")
 Drum is beeing cooled with water
The SF DTF 25 SH attachement unit, can be mounted on the Von Arx DTF 25 SH machine very easily in a couple of minutes

Attention! It is not allowed to run the side attachment unit at the same time as the main cylinder.

directional guide

Article no. 701235


The directional guide is particularly designed to be able to follow the given accurately.