Working width 250mm
With the DTF 25 SH the surface is carefully „grinded off“ instead of chipping it away. Thus the machine runs calmly and produces a smooth surface. The DTF 25 SH has a drum which is equipped with diamond blades. It removes the material very precise. For grooving or milling you can choose between two different diamond blades: one for rough and one for smooth surface preparation. For running the machine you must connect the water cooling system so the diamond blades do not overheat. The machine is available as a 11 kW electrical version with a hydraulic traction unit.





with hydraulic tractionrschub

3x 400V / 50Hz, 11 kW

Article no. 708697


Weight:ca. 220 - 226 kg (484 - 497 lbs)
Electrical power:3x 400V / 50Hz
Wattage:11 kW
Working width:250mm (10“)
Distance to wall:105mm (4.2“)
Dimensions:1150 x 480 x 1150mm (45 x 19 x 45“)
Standard cutters:without drum
 Drum is beeing cooled with water



Side cutter to DTF 25 and DTF 25 SH

Article no. 707534


Weight:ca. 15 kg (33 lbs)
Working width:87mm (3.5“)
Distance to wall:15mm (0.6“)
Dimensions:320 x 215 x 200mm (13 x 8.5 x 8")
 Drum is beeing cooled with water
The SF DTF 25 SH attachement unit, can be mounted on the Von Arx DTF 25 SH machine very easily in a couple of minutes

Attention! It is not allowed to run the side attachment unit at the same time as the main cylinder.

DTF 25 SH Detail-Ziel-DTF-701235

directional guide

Article no. 707534

The directional guide is particularly designed to be able to follow the given accurately.