DTF 25 SH
Working width 250mm
With the DTF 25 SH the surface is carefully „grinded off“ instead of chipping it away. Thus the machine runs calmly and produces a smooth surface. The DTF 25 SH has a drum which is equipped with diamond blades. It removes the material very precise. For grooving or milling you can choose between two different diamond blades: one for rough and one for smooth surface preparation. For running the machine you must connect the water cooling system so the diamond blades do not overheat. The machine is available as a 11 kW electrical version with a hydraulic traction unit.
products
DTF 25 SH
with hydraulic traction, 400V
| Article number | 708697 |
| Power | 400V, 50HZ |
| Wattage/HP | 11Kw/14.8HP |
| Weight | 223.2Kg/492lbs |
| Working width | 25cm/10″ |
| Distance to wall | 10cm/4.1″ |
| Depth hard concrete | 10mm/.40″ |
| Depth softer concrete | 12mm/.48″ |
| Production/h | 45-50m2/485-540 ft2/h on maximum depth |
| Dimensions cm/inch | 115x48x115/45x19x45 |
| Standard cutters included | 66pcs Diamond blades 125mm/5″ |
DTF 25 SH
with hydraulic traction, 480V
| Article number | 800015 |
| Power | 480V, 60HZ |
| Wattage/HP | 11Kw/14.8HP |
| Weight | 220Kg/485lbs |
| Working width | 25cm/10″ |
| Distance to wall | 10cm/4.1″ |
| Depth hard concrete | 10mm/.40″ |
| Depth softer concrete | 12mm/.48″ |
| Production/h | 45-50m2/485-540 ft2/h on maximum depth |
| Dimensions cm/inch | 115x48x115/45x19x45 |
| Standard cutters included | 66pcs Diamond blades 125mm/5″ |
DTF 25 SH LPG
Honda, propane
| Article number | 800076 |
| Engine/power | Honda 22 HP, 16.5 kW, propane |
| Wattage/HP | 11Kw/14.8HP |
| Weight | 240Kg/529 lbs |
| Working width | 25cm/10″ |
| Distance to wall | 6.7 cm/2.6″ |
| Depth hard concrete | 10mm/.40″ |
| Depth softer concrete | 12mm/.48″ |
| Production/h | 540-595 f2/h, 50-55 m2/h on maximum depth |
| Dimensions cm/inch | 115x48x115/45x19x45 |
| Standard cutters included | 73 pcs of 5”, 125 mm diamond blades |
DTF 25 SH LPG
Vanguard, propane
| Article code | 800076V |
| Engine/power | Vanguard, propane |
| Wattage/HP | 23 Kw/31 HP |
| Weight | 240 Kg/529 lbs |
| Working width | 25 cm/10″ |
| Distance to wall | 6.7 cm/2.6″ |
| Depth hard concrete | 10 mm/.40″ |
| Depth softer concrete | 12 mm/.48″ |
| Production/h | Up to 968 f2/h, 90 m2/h |
| Dimensions cm/inch | 115x48x115/45x19x45 |
| Standard cutters included | 73 pcs of 5”, 125 mm diamond blades |
SF DTF 25
Side cutter to DTF 25 and DTF 25 SH
Article no. 707534
| Weight: | ca. 15 kg (33 lbs) |
| Working width: | 87mm (3.5“) |
| Distance to wall: | 15mm (0.6“) |
| Dimensions: | 320 x 215 x 200mm (13 x 8.5 x 8″) |
| Drum is beeing cooled with water |
| The SF DTF 25 SH attachement unit, can be mounted on the Von Arx DTF 25 SH machine very easily in a couple of minutes |
Attention! It is not allowed to run the side attachment unit at the same time as the main cylinder.
directional guide
Article no. 701235
Our brochure
If you need to find more information about the entire product group, you can download our brochure.
Mounting and operational documentation
Here you can find technical instructions and spare parts information about our machines and tools.
